KROHNE OPTISONIC 7060 EN - Manual (Page 41)

OPTISONIC 7060
Electrical & mechanical installation manual 730962.31.00 page 41 of 52
Name Class Description Value
Output range
W The current measured value can no longer be
represented by the pulse output, because the maximum
output. frequency was reached.
Measurement
invalid
E More than one path must be substituted by the
replacement value calculation routine, or the activated
adaptive path failure compensation is not yet active.
System error
E Safe operation of the system is not guaranteed. Cause of the fault
• CRC program code
• CRC parameters
• CRC counter value
• CRC replacement path
weights
• Parameters (implausible)
• DSP
4.1.5 Acknowledgement of a log book entry
4.1.6 Resetting the error volume counters
W Output S+
E Measurement
S+
Path
E System S+
Parameter