KROHNE CARGOMASTER User Manual
Page 40
CARGOMASTER®5
Operators Manual - 40
Hull
Stress
This picture basically deals with Shearing forces and
Bending Moments, and displays a graphical view for
easy detection of unwanted situations
Stability Results
The Stability Results picture has 5 sections:
Weights
Displays total weights for different cargo and load types.
“Combined” means tanks defined as both cargo and ballast
tanks
Gravity
Centers
The values KG, KM and GM are displayed:
KG
: distance from Keel to center of Gravity
KM
: distance from Keel to Meta center
GM
: dist. from center of Gravity to Meta center
All hulls have a Maximum KG margin. The Intact Max KG
curve is always configured (and checked). The Damage Max
curve is optional. Note that this is only a basic damage
stability check.
Calculated
Trim
/
List
Calculated Trim and List values are shown, along with
longitudinal and transverse moments. (Trim/List are
calculated, and may differ from measured Trim/List and