KROHNE CARGOMASTER - Manual (Page 55)

CARGOMASTER®5
55 - Operators Manual
Code Function Code Function
BT Bottom Temperature LOI Low Inertgas Limit
UT Upper Temperature DIF Density Difference
MT Mid Temperature LPR Line Pressure
XT1-XT5 Extra Temp. Elements 1-5 VPR Vapor Pressure
blank, bla Blanks a column status, sta Status
SUM,
PARTSUM Inserts a partial sum, for
Scratchgroups only
Table 3Unit codes for the Valuetable
Bargraphs
The BarGraph picture (Ctrl+F3) shows tank
volumes as vertical bars. An arrow indicates that
this tank has loadrate, either loading or discharging.
A coloured field, red or yellow, indicates that there
is an alarm or warning state for the tank If the field
is blinking, the alarm is unacknowledged.
Change Value Type
In the bottom part of the bar, there are two numeric
values. The first one will always show Vol% (fixed
setting) the other one, however, is user selectable. In
tis example it shows Ullage.
Either use the Applications key ( ) or use the
mouse to pick the desired unit from the unit
selector.
See also Screenshot 36 The Info-line
Right-click Options
By right-clicking any of the bars you get the following options:
Tank Information : Brings up the Tank Information dialogue box. From
here you can view detailed information on the tank,
and also adjust and turn on or off alarms.
Group information : Shows the Group information dialogue box. Note that
the dialogue box will not appear if the tank is not
currently allocated to a group.
Show in ValueTable : Brings the selected tank to display in ValueTable along
with the other tanks in the group.
Show in BarGraph : Brings the selected tank to display in BarGraph along
with the other tanks in the group.
Adjust fontsize
In order to adjust font and bar size, either