KROHNE CARGOMASTER User Manual
Page 43
CARGOMASTER®5
43 - Operators Manual
Screenshot 25 Adjust time. Select either of GMT or local to adjust respectively.
GMT:
Enter correct GMT date as MM/DD/YY where M is
month, D is day and Y is year. For time, use the format
HH:MM:SS where H is hour, M is minute and S is
seconds
Local time:
Enter time in the format HH:MM or just -/+MM (+15
adds 15 minutes to the displayed local time)
Trim – List - Draft
Press F4 for the Trim/List/Draft dialogue to appear, or select it from the Misc -
Trim/List/Draft... menu. The following data is displayed:
TRIM
/
LIST
:
In degrees and meters/feet. A negative value for TRIM
means Draft is Aft. Positive value means Draft is Fore.
In case there are no drafts sensors installed, the
inclinometer options should be selected.
Atmosphere
:
Pressure and temperature
Seawater
:
Density (manually entered values)
Measured Drafts
:
Values shown here is dependent on how many draft
sensors are installed, and where they are installed. In a
setting like the one shown in the screenshot below, the
draft arrangements makes it possible to even measure
hull deflection.