Specifications, Warranty, Maintenance – Martel Electronics BetaGauge 301 User Manual

Page 36

Advertising
background image

12. Warranty

Martel Electronics Corporation warrants all products against material defects and
workmanship for a period of twelve (12) months after the date of shipment. Problems or
defects that arise from misuse or abuse of the instrument are not covered. If any product
is to be returned, a “Return Material Authorization” number must be obtained from our
Customer Service Department. This number must be indicated on the return package as
notice to our Receiving Department to accept the shipment. Any package not so marked
will not be accepted and will be returned to the shipper. Martel will not be responsible for
damage as a result of poor return packaging. Out of warranty repairs and recalibration
will be subject to specific charges. Under no circumstances will Martel Electronics be
liable for any device or circumstance beyond the value of the product.

13. Maintenance

13.1 Replacing Batteries

Replace batteries as soon as the battery indicator turns on to avoid false measurements.
If the batteries discharge too deeply the BETA 301 will automatically shut down to avoid
battery leakage.

Note: Use only AA size alkaline batteries or optional rechargeable battery pack.

13.2 Cleaning the Unit

Warning

To avoid personal injury or damage to the calibrator, use only the specified replacement
parts and do not allow water into the case.

Caution

To avoid damaging the plastic lens and case, do not use solvents or abrasive cleansers.

Clean the calibrator with a soft cloth dampened with water or water and mild soap.

13.3 Service Center Calibration or Repair

Only qualified service personnel should perform calibration, repairs, or servicing not
covered in this manual. If the calibrator fails, check the batteries first, and replace them if
needed.

Verify that the calibrator is being operated as explained in this manual. If the calibrator is
faulty, call for an RMA number or go to www.martelcorp.com to download an RMA form
to return the unit. Be sure to pack the calibrator securely, using the original shipping
container if it is available.

34

Advertising