Agilent Technologies E5810A User Manual
Page 112
Advertising
112
Chapter 4
Troubleshooting Information
Checking the E5810A
ERROR: IP in use
<addr>
The E5810 tried to use an IP address that is currently being used by
another device on the network. Try these actions:
Reboot the E5810 with the
Preset
button depressed to set the
E5810 back to booting with DHCP enabled.
OR
Remove other device(s) from the network and reboot the E5810
OR
Move the E5810 to a Local network, disable DHCP, and set the
E5810 to an unused IP Address.
Error Message
Description
Advertising