Agilent Technologies E5810A - Manual (Page 55)

Chapter 2 55
Installing the E5810A
Installing the E5810A on an Enterprise Network
2 Display the Current Configuration Page. from the Welcom e page, click
the View & Modify Configuration icon to display the Current
Configuration of E5810 LAN/GPIB Gateway page
3 Display the Modify Configuration Page. From the Current Configuration
of E5810 LAN/GPIB Gateway page, click the Modify Configuration button
to display the Password dialog box.
If the default password (E5810) is being used, the password is
displayed as asterisks (*****). If not, type in the current password. Then,
click the
Submit button to display the Configuring Your E5810 LAN/GPIB
Gateway page.
Click this icon