Agilent Technologies E5810A - Manual (Page 60)

60 Chapter 2
Installing the E5810A
Verifying Instrument Communication
Where to Go Next
„ If you want to program instruments from your PC. Go to
“Installing and Configuring Agilent IO Libraries Suite” on
page 61.
„ If you do not want to program instruments. This completes
the E5810 installation.
4. Type command on
Instrument Command
line and then click
Query
3. Click the *IDN? button
to identify the instrument
1. Click the Find button (as required)
to display all connected instruments
2. Select Instrument at
SICL Address gpib0,22