NOSHOK 756 Series Digital Pressure Transmitters - Manual (Page 5)

2
2.1.3 Display Unit
The measured-value indicator has four digits (in a 7-segment display) + symbols. Be-
low it, is line 1 (16-segment display) used to display error codes and the signal’s unit
of measure. The unit of measure can be selected by the operator.
Additional information is displayed in lines 2 and 3 (16-segment display). The operator
can enter commands in the programming mode on the display unit by means of menu
driven, clear-text prompts.
Devices with displays clearly offer a higher number of programming and control inter-
face options. These options include alarm status, dampening, signal inversion, tank
linearization and diagnostic messages.
Display units can be easily upgraded (see Section 4.2).
$"+)#/"1)-,
/",'%