ADTRAN Express 4100 - Manual (Page 110)

Chapter 3. Terminal Menu Operation and Structure
3-60 Express 4100/4110 User Manual 61200176L2-1
Communities/Manager IP
Write security: 1; Read security: 3
This is the IP address of SNMP manager. If set to 0.0.0.0, any SNMP
manager can access the Express 4100/4110 for this community.
SNMP/Traps
The Express 4100/4110 can generate SNMP traps. See “SNMP” on page C-
1 for trap types supported. This list allows up to four managers to be
listed to receive traps.
Traps/Manager Name
Write security: 2; Read security: 4
This is the text string describing the name of the entry. It is intended
for easy reference and has no bearing on the SNMP trap function.
Traps/Manager IP
Write security: 2; Read security: 4
This is the IP address of the manager that is to receive the traps.
Management/Maint Port
The Express 4100/4110 has an EIA-232 connector on the back of the unit.
The setup for that port is under this menu.
Maint Port/Password Protect
Write security: 0; Read security: 1
When set to No, the maintenance port is not password protected. When
On
(def), the Express 4100/4110 will prompt for a password upon startup.
Maint Port/Password
Write security: 0; Read security: 1
This is the text string that is used for comparison when password protect-
ing the maintenance port. By default, no password is entered.
The security level for the maintenance port is always set to 0. This gives full access to all menus.