Caller id mismatch, Callid 1 in use, Callid 2 in use – ADTRAN Express 4100 User Manual

Page 153: Can't answer, call not ringing, Cause: ‘<cause>’ diag=<num

Advertising
background image

Appendix B. Log Messages

61200176L2-1

Express 4100/4110 User Manual

B-9

Caller ID mismatch

level 3

The caller ID number did not match the numbers placed in Configura-
tion/Connection List/Authentication

parameters Call ID 1 or Call ID 2.

CallID 1 in use

level 2

An outgoing call on LDN 1 was dumped because it was already busy
with a call.

CallID 2 in use

level 2

A outgoing call on LDN 2 was dumped because it was already busy with
a call.

Can't answer, Call not ringing

level 1

Internal error as a result of trying to answer a non-existent incoming call.

Cause: ‘<cause>’ diag=<num>

level 3

The ISDN switch has sent a Cause information element describing the
reason reported from the ISDN switch as <cause> for a call failure. The
value <num> is the diagnostic which can be helpful for diagnosing by the
telephone company or ADTRAN technical support. The following will
be reported for the <cause> value:

BAD_INFO_ELEM

BEAR_CAP_NOT_AVAIL

BEARER_CAP_NOT_AUTH

CALL_REJECTED

CAP_NOT_IMPLEMENTED

CHAN_DOES_NOT_EXIST

CHAN_NOT_IMPLEMENTED

Advertising