Revo RELPTZ22-3 User Manual - Manual (Page 27)

REVO America www.revoamerica.com RELPTZ22-3
25
by the user, to focus and stay there. With manual focus the image that
is being focused on can become out of focus due to wind or other
factors. Using Constant Manual will adjust the focus for these minor
changes by keeping the desired image in focus.
FOCUS LIMIT:
This sets an approximate value that the camera will remain in focus from
the setting value. The options are: 3.3
‘ (1 m), 4.9’ (1.5 m), 8.2’ (2.5 m)
and 19.7 ’ (6 m).
CAUTION
Avoid continuous use of the Auto Focus mode. It will shorten the life of the lens.
WB CONTROL
The White Balance WB setup submenu provides control to adjust the color
hue (red and blue) gain for a camera so that true white appears white in the
image. It is normally compensated for by the automatic gain control (AGC). In
some lighting conditions, you may need to manually adjust the red and blue
settings for optimal viewing. When Automatic White Balance is enabled, the
camera measures the image and automatically adjusts the red and blue
settings to balance white. When automatic white balance is disabled, the
camera uses the values set for the red and blue gain to balance white.
WB SETUP
MODE : AWB
R GAIN : ---
B GAIN : ---
SAVE AND EXIT(ESC TO CANCEL)
MODE:
AWB/WAWB/INDOOR/MANUAL
AWB: Automatic white balance computes the white balance value output
using color information from the entire screen automatically. Color range
from 2500 to 9500 °K.