Revo RELPTZ22-3 User Manual - Manual (Page 31)

REVO America www.revoamerica.com RELPTZ22-3
29
HOME FUNCTION SETUP
HOME FUNCTION : PRESET
FUNCTION NUMBER : 10
WAITING TIME : 120 SEC
FUNCTION ENABLE : ON
SAVE AND EXIT(ESC TO CANCEL)
The
Home Function defines the camera’s normal operation when left unattended. The Home
Function, once programmed, will return the camera to its normal or programmed operation after
manual control of the camera has stopped. For example, if you are using the keyboard controller
or DVR to manually zoom, pan or tilt the camera to view something of interest, setting the Home
Function to one of the functions will program the camera to automatically begin one of the
following: None/Tour/Auto Scan/Preset, after a user defined waiting time.
In the example shown above, the camera will go to Preset 10, 120 seconds after manual control
has stopped, when Function Enable is set to ON. If NONE is selected or Function Enable is set to
OFF, the scene will remain where the manual control stopped.
HOME FUNCTION:
None/Tour/Auto Scan/Preset.
FUNCTION NUMBER:
The number of the Tour, Auto Scan or Preset that you want to start.
WAITING TIME:
The amount of time the system will wait before starting the Home
Function. You can set it for 10~240 seconds.
FUNCTION ENABLE ON/OFF. Set to ON to enable the Home Function.
OSD DISPLAY SETUP
The OSD Display Setup menu allows you to customize the camera display. You can select what
information you want to display and select the location on the screen where you want it to display.