Troubleshooting – Revo RELPTZ22-3 User Manual User Manual
Page 40
REVO America
www.revoamerica.com
RELPTZ22-3
38
T
T
r
r
o
o
u
u
b
b
l
l
e
e
s
s
h
h
o
o
o
o
t
t
i
i
n
n
g
g
Prior to calling product support, verify the installation of the camera as described in this manual. If
everything is connected correctly, check the following:
Problem
Possible Solution
No video
· Verify that power is connected to all pieces
of equipment in the system.
· Verify that the power switches are in the
ON position.
· Check the video connections.
Poor video quality
· Check that the BNC connectors are
inserted properly.
· Check the voltage level of the dome
camera.
· Cable for video is shielded.
Dome cameras lose their
positions
· Reset the cameras using the Dome Setup
menu.
· Check that the dome camera is inserted
properly in the base.
· Check the voltage level of the camera.
Camera number does not match
the multiplexer number.
· If using a multiplexer. Check the camera ID
and insert the BNC cable into the proper
input of the multiplexer.
CAUTION
Do not open the camera or attempt repair of the internal parts.