Revo RELPTZ22-3 User Manual - Manual (Page 42)

REVO America www.revoamerica.com RELPTZ22-3
40
Home Position
The default position to which the dome camera returns after an assigned period of inactivity
passes. The default position may be a Preset, Tour or No Action.
Input Alarm
A connection point on the dome camera that enables the system to monitor Input Devices. There
is one alarm input.
Input Device
An external device that provides information about the condition of system components that
connect to the input on the dome camera. Typical input devices include door contacts, motion
detectors or smoke detectors.
IR Mode
A feature of the camera that permits manual or automatic switching between color and IR (black-
and-white) operation when light levels are low. When IR mode is active, clearer images may be
obtained under low-light conditions.
Normal Input State
Describes the expected state of a device connected to dome camera
’s input. The normal state
may be open or closed. When a device is not in its normal input state, an alarm is issued.
North Position
User-definable setting that may correspond to magnetic north or some well-known landmark.Used
to approximate the camera dome's pointing direction when Direction Indicators are enabled.
Preset
Programmed video scene, based on a specific pan, tilt, zoom, and focus settings. Up to 240
Presets may be programmed for the dome camera.
Vector Scan
Allows the camera to move from start point to end point including tilt and zoom simultaneously and
linearly.