Spectrex 40/40I Triple IR (IR3) Flame Detector - Manual (Page 69)

Long Range IR3 Fire Simulator 57
D Accessories
➣ In this appendix…
Long Range IR3 Fire Simulator page 57
Tilt Mount - P/N 40/40-001 page 60
Duct Mount P/N 777670 page 61
Weather Protection - P/N 777163 page 62
Laser Detection Coverage Pointer - P/N 777166 page 63
Air Shield - P/N 777650 page 64
This appendix describes the accessories that can help you maximize fire
detection with the SharpEye IR3flame detector:
D.1 Long Range IR3 Fire Simulator
The SharpEye IR3 Long Range Fire Simulator 20/20-310 is designed
specifically for use with SharpEye flame detectors. The Fire Simulator emits
IR radiation in a unique sequential pattern corresponding to and
recognizable by the detector as fire. This allows the detectors to be tested
under simulated fire conditions without the associated risks of an open
flame.
There is an optional beam collimator, model no. 20/20-190, specially
designed for extended test range.
Figure 15: SharpEye Long Range Fire Simulator 20/20-310