Thermo Fisher Scientific CyberScan DO 300 - Manual (Page 18)

Instruction Manual DO 300
15
7 MEMORY FUNCTIONS
7.1 Memory Input
Your meter stores data in sets that include:
z Dissolved oxygen with corresponding temperature
reading
z Time and date reading was taken
You can store up to 50 sets of data in any combination of %,
mg/L or ppm readings.
To store a reading:
1. During any measurement function (MEAS), press the MI
key to input any data into the memory.
2. MEM, “StO” and memory number will flash. The meter
then returns to measurement mode.
NOTE: If the memory is full, the first value stored will be
erased to create space for the new value.
Figure 13: Memory Input, First
Value
Figure 14: Memory Input,
Second Value
Figure 15: Memory Input,
Third Value