Thermo Fisher Scientific CyberScan DO 300 - Manual (Page 22)

Instruction Manual DO 300
19
% saturation Measurement Mode
CLr: Memory Clear
• Clear all stored readings
Instructions on page 20.
dPr: Dissolved Oxygen parameters
• Select Hg or Pa barometric pressure units
• Select barometric pressure
Instructions on page 21.
OFS: % saturation offset adjustment
• Set % saturation offset adjustment
Instructions on page 24.
CAL: Viewing previous calibration data
• View previous calibration data, including date/time
Instructions on page 25.
ELE: Viewing probe data
• View probe slope
• View mV value equivalent to 100% saturation
• View mV value equivalent to 0% saturation
• View offset value
Instructions on page 26.
COF: Unit configuration
• Ready indicator ON or OFF / auto endpoint ON or OFF
• Select °C or °F
Instructions on page 28.
LCd: Backlit display
• Adjust brightness of backlit LCD
Instructions on page 32.
CLO: Clock setting
• Setting year
• Setting date (month/day)
• Setting time (hour/minute/second)
Instructions on page 33.
rSt: Reset to factory default
• Reset to factory default settings
Instructions on page 35.