Thermo Fisher Scientific CyberScan DO 300 - Manual (Page 36)

Instruction Manual DO 300
33
8.9 CLO: Setting the Real-Time Clock
Your meter features a real-time calendar and clock. This
helps you meet GLP (Good Laboratory Practice)
standards.
From measurement mode
1. Press SETUP key to enter SETUP mode.
2. Press MI/ or MR/ keys to scroll through main
groups until you view parameter “CLO” in the upper
display.
3. Press the ENTER key to enter parameter “CLO”. The
meter lets you select the century: “19” or “20”. The
century digits will flash.
4. Press MI/ or MR/ keys to toggle to the correct
century.
5. Press the ENTER key to confirm the century and
move to “year” selection. The “year” digits will flash.
6. Press MI/ or MR/ keys to toggle to the correct
year.
7. Press the ENTER key to confirm the year and move
to “month” selection. The “month” digits will flash.
8. Press MI/ or MR/ keys to toggle to the correct
month.
9. Press the ENTER key to confirm the month and
move to “date” selection. The “date” digits will flash.
10. Press MI/ or MR/ keys to toggle to the correct
date.
11. Press the ENTER key to confirm the date and move
to “hour” selection. The “hour” digits will flash.
12. Press MI/ or MR/ keys to toggle to the correct
hour. Note the “AM” and “PM” indicator on the lower
portion of the display.
13. Press the ENTER key to confirm the hour and
move to “minute” selection. The “minute” digits will
flash.
Figure 31: Setting Year and
Date information