Thermo Fisher Scientific CyberComm Pro for CyberScan pH 1000 & 2500 - Manual (Page 17)

Instruction Manual CyberComm pH 1000/ pH 2500
20
Figure 17: Set Memory Options
To disable the Data Log on Time Interval, uncheck the box for this option. This checkbox toggles between
disable and enable of this option. To exit from Data Log on Time Interval dialog box, press OK or CANCEL
button.
Store Memory
This option stores up to 16 sets of data into the memory. If the button for this option is clicked, the current
reading will be stored into the memory. The method of the memory storage is Last-In-First-Out (LIFO).
Clear Memory
This option clears all meter memory data from meter. All stored data will be erased from memory if the
button for this option is clicked.
Set Resolution
Select the pH resolution as either 0.1 or 0.01 by its appropriate button. Press OK or CANCEL button to exit
from this dialog box. See Figure 18.
Figure 18: Resolution
Set Temperature
Set its manual temperature as shown. To set manual temperature, use the scroll bar to increase or
decrease the temperature value. Confirm the set value by selecting OK button to proceed to next function.
The set temperature value will not be stored into the meter after CANCEL is selected.