Thermo Fisher Scientific CyberComm Pro for CyberScan pH 1000 & 2500 User Manual
Page 2
PREFACE
Thank you for selecting the Eutech Instruments / Oakton Instruments pH 1000/ pH 2500 benchtop meter.
This meter comes with the CyberComm Pro DAS Software which allows you easy access and
communication via a computer with connection to the meter.
The instruction manual serves to explain the use of the CyberComm Pro step-by-step installation and user
guide to help you familiarize with the software’s features and functions. It is structured sequentially with
illustration of active software screens and diagrams that explains the various functions and menus available.
This manual is written to cover as many anticipated applications and uses of the CyberComm Pro software
along with pH 1000/ 2500 Bench meters only. If there are doubts in the use of the software, please do not
hesitate to contact Eutech Technical Support at
or call us at (65) 6778-6876
for assistance.
CyberComm Pro software is FREE for all customers who have purchased our bench meters. Please
download the latest CyberComm Pro version via our website at
www.eutechinst.com/cybercomm-
software.htm
Eutech Instruments/ Oakton Instruments reserve the rights to change, make improvement and modify
specifications without prior notice and cannot accept any responsibility for damage or malfunction to the
instrument caused by improper use.
Copyright
©
2002 All rights reserved. Rev 1.1 03/03
Eutech Instruments Pte Ltd/ Oakton Instruments