Thermo Fisher Scientific Alpha RES 1000 User Manual
Alpha res 1000
Advertising
Table of contents
Document Outline
- 68X216807 - RES1000_Rev4.pdf
- 68X216807 - RES1000.pdf
- 1 Introduction
- 2 Assembly and Installation
- 3 Electrical Connection
- 4 Overview
- 5 Measurement
- 6 Calibration Mode
- 7 Advanced Set-Up Mode
- 7.1 Temperature Coefficient sub-function
- 7.2 Temperature calibration (ATC mode only)
- 7.3 Control Relay A/Control Relay B (SP1/SP2) sub-function
- 7.4 Controller (Cntr) sub-function
- 7.5 Measurement Range sub-function
- 7.6 Configuration (ConF) sub-function
- 7.6.1 Entering Configuration sub-function
- 7.6.2 Selecting Filter Function and the Alarm or Wash Function
- 7.6.3 Selecting the alarm time lag (if the relay 3 is set to Alarm)
- 7.6.4 Selecting steady or pulse contact for the alarm relay (if the relay 3 is set to Alarm)
- 7.6.5 Wash Contact (if the relay 3 is set to Wash)
- 7.6.6 Input Line Resistance Adjust
- 7.6.7 Reverting to factory default settings
- 7.7 Calibration (CAL) sub-function
- 8 Auto/Manual Mode
- 9 Technical Specifications
- 10 General Information
- 11 Appendices
- 68X216807 - RES1000.pdf