Badger Meter ORION Classic (CE) - Manual (Page 27)

Installation Manual
4 . With the installation bracket in one hand and the housing in your other hand, hold the bracket still and twist the
housing approximately 1/4 turn clockwise until it clicks and locks into place .
Figure 24: Bracket and housing connection
To install the endpoint assembly, follow these steps .
1 . Align the ORION endpoint and the installation bracket with the antenna facing upwards ( Figure 25 ) .
2 . Using two customer-supplied screws, secure the endpoint and installation bracket assembly to a non-metallic joist
or wall .
Figure 25: Endpoint positioning
Page 27 June 2014