Badger Meter 340LW Series Lonworks Btu Transmitter - Manual (Page 3)

3
INSTALLATION
Mechanical installation
The Badger
® Series 340LW transmitter may be sur-
face mounted onto a panel, attached to DIN rails using
adapter clips or wall mounted using two optional enclo-
sures.
Location
Although the Series 340LW device is encapsulated, all
wiring connections are made to exposed terminals. The
unit should be protected from weather and moisture in
accordance with electrical codes and standard trade
practices. In any mounting arrangement, the primary
concerns are ease of wiring and attachment of the
programming cable. The unit generates very little
heat so no consideration need be given to cooling or
ventilation.
Surface Mount Installation
The Series 340LW may be mounted to the surface of any panel using
double-sided adhesive tape or by attaching fasteners through the holes
in the mounting flanges of the unit.
Din Rail Mounting
Optional clips snap onto the mounting flanges allowing the Series
340LW to be attached to DIN 15, 32, 35 mm DIN rail systems.
Wall Mounting
Optional metal and plastic enclosures are available to mount
the Series 340LW to a wall when no other enclosure is used.
The enclosure is first attached to the wall using fasteners
through its mounting holes. After wiring, the transmitter may
be attached to the enclosure with the terminal headers fac-
ing in using the slots in the mounting flanges. As an alternate
mounting arrangement, the Series 340LW may be fastened to
2.10”
(53.3mm)
3.65”
(92.7mm)
2.95”
(74.9mm)
.88”
(22mm)
.60”
(15mm)
4.5”
4.50”
2.00 ” Side
Top
Side
Series 340LW Dimensions
340LW Metal Box Dimen-
sions
4.60”
4.60”
2.25 ” Side
Top
Side
3.25”
5.125”
340LW Plastic Box Dimensions