Crystal DataLoggerXP Digital Pressure Gauge Software - Manual (Page 14)

Data Logging with DataLoggerXP  12
XP2i Operation Manual
—
InstaLLIng the softWare
DataLoggerXP can either be installed from a CD provided by Crystal Engineering, or downloaded from the Crystal Engineering website.
We recommend you check the website for the latest version.
Installing from the cd
Run the Setup.exe application located on the install CD. This is typically D:\Setup.exe, but may be different on your computer.
Installing from the Internet
Visit crystalengineering.net and select the DataLoggerXP software page to download the latest version of the software.
Once the setup application begins, follow the on-screen prompts to complete the installation. If DataloggerXP is being upgraded, the prior version does not
need to be uninstalled, as the new version will be installed over any existing version.
—
authorIZIng a gauge
The gauge must be authorized using a purchased authorization key to obtain the full 32 000 data point recording capability. The key is specific to a gauge’s
serial number, and can only be used with the gauge it was meant to authorize.
to authorize a gauge
1 Connect the gauge to your computer.
2 From the File menu, choose Authorize Gauge to start the Authorization Wizard.
3 Follow the on-screen instructions.