Innotech Device Communications - Manual (Page 11)

Page 3
Chapter 1 – About this document
DS 99.05 – Ethernet Setup Manual for Device Communications 1
What's covered in this document
This document provides detailed instructions for configuring the Ethernet settings of
your Innotech devices to function on your Local Area Network (LAN). In preparing
this document it is assumed that you are familiar with using Windows 7 Professional,
Windows Vista Business or Windows XP Professional operating systems. Instructions
for configuring the Ethernet settings are provided for the following Innotech controllers
and devices:
Genesis II controller •
MAXIM III controller •
MAXIM 1010 controller •
IG01 Sub System Gateway •
IG03 BACnet Gateway •
IG04 BACnet Gateway •
CONV-E converter •
IWS01 innSIGHT Supervisor Web Server •
Special Considerations
In order to successfully configure the Ethernet settings of your Innotech device(s) on the
site LAN where the device(s) will be installed, you must have the following information
available:
Static IP address to be assigned for each Innotech device(s) •
Subnet mask for the LAN •
Default gateway address for the LAN •
Consult with the site IT Manager to gather this information before proceeding to configure
the Ethernet settings of your Innotech device(s).