Innotech Device Communications - Manual (Page 30)

© MASS ELECTRONICS Pty Ltd 2011
DS 99.05 – Ethernet Setup Manual for Device Communications
Page 22
Edition 1.0 dated 04/10/11
4
Configuring Ethernet settings of IG01 with embedded web server
The Ethernet settings on the IG01 Sub System Gateway can be configured and modified
with the embedded web server to suit your LAN requirements. But in order to initially
access the embedded web server of the IG01 out of the box, you need to configure the
network settings of your computer to be on the same network range as the IG01 default
factory Ethernet settings.
For detailed instructions on how to configure your computer network settings, please
refer to the Configuring network settings of your computer section.
When you have configured your computer network settings, follow the instructions
below to access the IG01 embedded web server, and edit or modify the default Ethernet
settings of the IG01 to suit your LAN requirements.
Launch Internet Explorer and enter the default IP address of the IG01 ( 1. 192.168.2.100)
into the address bar, as illustrated in Figure 4-16 below.
Access embedded web server on IG01 Figure 4-16:
The home page of the IG01 embedded web server should now be displayed. Click on 2.
Comm Setup from the menu buttons in the left pane of the window, as illustrated in
Figure 4-17 below.
IG01 embedded server home page Figure 4-17: