MadgeTech RFOT Wireless Meat Temperature Data Logger - Manual (Page 11)

RFOT Product User Guide
MadgeTech 4 Setup Wizard
Select “I Agree” on the License
Agreement Panel Select a destination to install the
MadgeTech 4 Software
Once the installation is confirmed,
the MadgeTech Software will begin
to load to the Windows PC.
Once the installation of the software and driver is confirmed, the RFC1000 can then
be connected to the computer.
1 3
5
2
4
Select “Driver and Third Party Tools” in the
MadgeTech Installer Options window panel.
Select “Install USB Interface Drivers”.
With the USB Flash Drive inserted into the computer, locate the drive on the computer and double click
on Autorun.exe. Install the USB Interface Drivers (under Drivers and Third Party Tools).
The software
can also be downloaded from the MadgeTech website at www.madgetech.com/software-download.
1
2
7
Installing the USB Driver