MadgeTech RFOT Wireless Meat Temperature Data Logger - Manual (Page 17)

RFOT Product User Guide
RFOT Real time Wireless Alarming
1. On the Device ribbon tab, in the Real time Alarms group, click Manage Rules.
2. Click New.
a. The user must obtain the server address and port number.
This information can be obtained from the user’s IT department.
b. A From Email must also be selected; this will tell the receiver
who the email or SMS text message is from.
c. Security and authentication information may also need to be
entered. This information can be obtained from the user’s IT
department.
d. Once all of the required information is entered, a test SMS text
message or email can be sent by clicking on Test Email Settings.
3. Click OK.
1. Enter a name in the Rule name box.
2. Select whether notifications will occur when All Conditions are met or Any condition is met.
3. Select the conditions that need to be met before a notification will occur.
4. Select which notifications will occur (on screen, email, text message).
5. Select whether notifications will occur only once or on a regular basis.
6. If notifications are selected to be received by email or text
message, click Email settings and make sure the correct information
has been entered.
13