NORD Drivesystems BU0300 - Manual (Page 93)

7.8 Control terminals
BU 0300 EN Subject to technical alterations 93
Parameter Setting value / Description / Note
Supervisor
Parameter
set
Available with option
P422 Digital input function 3
BSC STD
0 ... 48
[ 2 ] Enable left as factory setting, control terminal 23
Various functions can be programmed. These can be seen in the following table.
P423 Digital input function 4
BSC STD
0 ... 48
[ 8 ] Parameter set switching Bit 0 as factory setting, control terminal 24
Various functions can be programmed. These can be seen in the following table.
P424 Digital input function 5
STD
0 ... 48
[ 4 ] Fixed frequency 1 (P429) as factory setting, control terminal 25
Various functions can be programmed. These can be taken from the following table.
... Function descriptions follow on the next pages