NORD Drivesystems TI 275281115 - Manual (Page 4)

PROFINET IO Bus module – SK TU4-PNT
4 / 8 TI 275281115 - 4913
Schematic diagram - electrical connection
(Terminal designation on example of NORD frequency inverter SK 180E … SK 2xxE)
SK TI4-TU4 BUS SK 180E … SK 2xxE
VI 24V
GND/0V
SYS +
SYS -
24V
GND/0V
SYS +
SYS -
Pos : 19 /T echnisc he I nf ormati onen/ SK xU x - Bus - Erweit erungen/ PROF INET IO /Konfiguration [ SK TU 4-PNT(-C(-M12))] @ 4\ mod_1385046026847_388. doc x @ 106049 @ 5 @ 1
Configuration
Configuration of the module for remote maintenance or for the system bus is carried out via the DIP
switches. The DIP - switch settings are read after a "Power On" of the module.
DIP switch Meaning
12 11 10 9 8 7 6 5 4 3 2 1
X X X No function X
0 System bus terminating resistor not set
1 System bus terminating resistor set
Access rights for remote maintenance
0 Only read access to parameters possible.
1 Read and write access to parameters possible.
0 No control possible.
1 Control is possible.
0 TCP/IP open connection.
1 Secure TCP/IP connection.
1. System bus (DIP 1)
The system bus must be terminated at both physical
ends.
2. (DIP 2 - 9)
No function
3. Access rights for remote maintenance (DIP 10 – 12)
Via the Ethernet protocols TCP and UDP the module
and the connected frequency inverter can be
accessed using remote maintenance. The type of
access is determined via the DIP - switch with inputs
10 to 12.
Pos : 22 /T echnisc he I nf ormati onen/ SK xU x - Bus - Erweit erungen/ PROF INET IO /LED Anzeigen [SK TU 4-PNT(-C)] @ 4\ mod_1385046540805_388. doc x @ 106124 @ 5 @ 1
LED displays
The operating statuses of the module are visualised using LED indicators.
No. Name Colour Meaning
1
RUN green Ethernet State
BF red Ethernet Error
DS green Device status
DE red Device error
2
Link green Link
Act yellow Activity
1
…
12
ON OF
F