ROTRONIC HF5 - Manual (Page 23)

E-M-HF5-V1_25
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroFlex HF5 Humidity Temperature
Transmitters: User Guide Instruction Manual
Document Type
Page 23 of 30
Document title
© 2009-2013; Rotronic AG E-M-HF5-V1_25
HF53 and HF55 transmitters:
Main Menu
Menu Items Selections / Information Notes
Device Settings
Units Metric / English
Back Light Key Press / On / Off Display backlight mode
Contrast LC display contrast adjustment
Trend On / Off Trend indication on the display
Device Information
Version Firmware version
Serial Nbr Serial number
Address RS-485 address
Type Device type
Name Device name User defined
Probe Information
Version Firmware version
Serial Nbr Serial number
Address RS-485 address
Name Device name User defined
SensorTest Humidity sensor status Off / Good / SQ-Tuned / Bad
Record On / Off
Data recording by the probe
(max. 2000 values)
Humidity Adjust
RefValue Humidity reference value ± 0.1 %RH steps
Acquired
Number of cal. points in probe
memory
<Acquire> Save cal. point to probe memory
<Delete> Erases all calibration points
<Adjust>
Effect depends on number of
calibration points
Temperature Adjust
RefValue Temperature reference value ± 0.1 ˚C steps
<Adjust> 1-point adjustment only (offset)
o
Record: both the recording mode (start / stop and the log interval cannot be changed from the menu and
are as configured with the ROTRONIC HW4 software
o SensorTest: Off means that the humidity sensor has not been tested due to the configuration settings of
the test. For a description of the automatic humidity sensor test and drift compensation (SQ-tuning) see
documents E-T-AC3000-DF-V1 and E-M-HW4v3-F2-005