ROTRONIC HF5 - Manual (Page 30)

E-M-HF5-V1_25
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroFlex HF5 Humidity Temperature
Transmitters: User Guide Instruction Manual
Document Type
Page 30 of 30
Document title
© 2009-2013; Rotronic AG E-M-HF5-V1_25
Document File Name Contents
E-M-HW4v3-F2-001 HW4 software version 3: Device Manager – HC2 probe series
E-M-HW4v3-A2-001 HW4 software version 3: Probe Adjustment function AirChip 3000 devices
E-M-HW4v3-DR-001 HW4 software version 3: Data Recording Function AirChip 3000 Devices
E-M-AC3000-CP AirChip 3000 Communication Protocol Options
E-DV04-RS485.01 RS485 Network Installation and Start-up Guidelines
E-M-TCPIP-Conf
Configuration procedures for ROTRONIC devices
with Ethernet (TCP/IP) interface
E-M-CalBasics
Temperature and humidity calibration basics
Instructions for using the ROTRONIC humidity standards
E-T-HumiDefs Humidity Definitions
Note: All document file names have an extension corresponding to the document release number. This
extension is not shown in the above table.
13 Document releases
Doc. Release Date Notes
_20 Jun.16, 2009 Original release
_21 Nov. 9, 2009
Expanded the range of power supply options for the HF53 and
HF55
Removed factory defaults specification
_22 Jan. 29, 2010 Changed the typical current consumption data
_23 Feb. 23, 2010
HF53 and HF55 with RS-485 interface: models with the
galvanically isolated power supply option cannot be powered
from the RS-485 main data line
_24 Jun. 18, 2010 Updated document for HW4 software v.3
_25 Mar. 27, 2013 Changed the HF52 operating limits at electronics