AT&T CL82350 - Manual (Page 17)

12
Handset settings
NOTES:
1. Your telephone service provider voicemail might alert you to new messages with a stutter
(broken) dial tone. Contact your telephone service provider for more details.
2. For information about using your voicemail service, contact your telephone service provider.
�ey tone
The handset is set to beep with each key press. If you turn off the key tone,
there are no beeps when you press keys.
1. Press MENU/
SELECT
in idle mode to enter the main menu.
2. Use q CID or pDIR to scroll to >Settings, then press
MENU
/SELECT.
3. Use q CID or pDIR to scroll to >�ey tone, then press
MENU
/SELECT.
4. Press q CID or pDIR to highlight On or Off.
5. Press
MENU
/SELECT to save your preference. There is a
confirmation tone and the screen returns to the main menu.
Press
OFF/
CLEAR
to cancel.
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. The year must be set so that the
day of the week can be calculated from the caller ID information. You can
turn off the date and time settings of the caller ID service and use your
own settings for each incoming call (see the
Use caller ID to automatically
set date and time section on the following page).
After a power failure, handset registration or deregistration, the system reminds
you to set the date and time for backup before entering idle mode.
Follow the steps below to set the month, day, year and time.
1. When the handset is in idle mode, press MENU/
SELECT
to
enter the main menu.
2. Press q CID or pDIR to scroll to >Settings, then press
MENU
/SELECT.
3. Press q CID or pDIR to scroll to >Set date/time.
4. Press
MENU
/SELECT twice to select >Date & time.
5. Press q CID or pDIR to select the month then press
MENU
/SELECT, or enter the number using the dial pad keys.
> Date & time
CID time sync
Telephone settings
>Set date/time
Home area code
> Key tone
Set date/time
KEY TONE
> On