AT&T CL82350 - Manual (Page 22)

17
Answering system settings
To delete your outgoing announcement:
1. When the handset is in idle mode, press
MENU/
SELECT
to enter the
main menu.
2. Press q CID or pDIR to scroll to >Answering sys, then press
MENU
/SELECT.
3. Press
MENU
/SELECT again to select >Announcement. The
system announces, “To play, press 2. To record, press 7.”
4. Press 3 to delete your recorded announcement.
When your announcement is deleted, the system answers
calls with the default announcement described on the
previous page.
Answer on/off
Unless you change it, the answering system is on and ready to record
messages. You can turn the answering system off, but if you do so, the
answering system does not answer calls and record incoming messages.
To turn the answering system on or off:
Using the telephone base:
Press /ANSWER ON to turn the answering system on
or off. If the answering system is turned on, it announces,
“Calls will be answered.” If the answering system is turned
off, it announces, “Calls will not be answered.”
Using a handset:
1. When the handset is in idle mode, press
MENU/
SELECT
to
enter the main menu.
2. Press q CID or pDIR to scroll to >Answering sys, then
press
MENU
/SELECT.
3. Press q CID or pDIR to scroll to >Answer ON/OFF, then
press
MENU
/SELECT.
4. Press q CID or pDIR to highlight On and Off, then press
MENU
/SELECT to confirm the setting. You hear a confirmation
tone. Press OFF/
CLEAR
to cancel.
If the answering system is on, the handset screen shows
ANS ON.
NOTE: If the answering system is off and there is an incoming call, the
system answers after 10 rings and announces, “Please enter your remote access code.”
For more information about remote access codes, see page 47.
•
> Answer ON/OFF
Ans sys setup
ANSWER ON/OFF
>On
Play messages
> Answering sys
Telephone settings
>
Announcement
Delete all old