UEi Test Instruments AQM4 - Manual (Page 13)

Press or to scroll through set-up
options from the following:
P10 - 99 Memory Clear
P20 - CO Alarm
P30 - Temperature Units
P40 - Logging Sample Rate
P50 - Pressure Compensation
P60 - Real Time Clock
P10: 99 MEMORIES CLEAR
P10 and "CLR" (Fig. 21) are displayed on the
LCD, press to enter into P11 and clear
or keep all the manual records. The current
setting will be blinking on the LCD. (Fig. 22)
Press or to choose NO or YES
and press to confirm.
-OR- Press to escape and return to P10
P20: CO ALARM
When P20 and "ALAR" (Fig. 23) are
displayed on LCD, press to enter into
P21 for setting CO alarm threshold. The
current set value will be blinking on the LCD
(Fig 24). Press to increase or
to decrease the value. The selectable alarm
limits are 25~200ppm in 5 ppm increments.
When the preferred alarm value is set, press
to save the setting
-OR- Press without saving and return
to P20.
12