Brother TD-2120N - Manual (Page 24)

P-touch Template 2.0 Command Reference
- 18 -
3. Examples for Using Commands
Step 5: With the P-touch Template 2.0 commands, select the assigned number for the bitmap file.
After using the P-touch Template Settings tool in Step 4, the remaining three commands must be sent to
the printer.
(1) Initialize P-touch Template
^II
Entered command
(2) Select the bitmap file to be printed.
In order to select the bitmap file, enter a specific character
“\” and the value one less than the assigned number for the
bitmap file that is shown in Step 3.
For example, if the assigned number for the bitmap file is 2,
enter \01 as shown right.
\01
Entered command
(3) Start printing.
^FF
Entered command
When the printer receives the command above, the label below is printed.