2 character alignment – Brother TD-2120N User Manual
Page 26
Advertising
P-touch Template 2.0 Command Reference
- 20 -
4. P-touch Template 2.0 Limitations
4.1.2 Character alignment
Horizontal alignment settings (“Justify” or “Equal Length”) specified in P-touch Editor are changed to the
left alignment setting.
The setting for line feed with a line feed specified with the P-touch Editor can be set between 0 and 255
dots.
A negative line spacing setting cannot be used in P-touch Editor. In addition, since there is an upper limit
for the line width with the printer, a line spacing setting larger than this limit specified in P-touch Editor will
not be applied on the printer.
Specifying the line spacing setting in P-touch Editor
Advertising