Brother TD-2120N - Manual (Page 73)

P-touch Template 2.0 Command Reference
- 67 -
7. Control Command Details
ESC iXy2 Select printer settings (cut options–specifying number of labels)
ASCII: ESC i X y 2 n1 n2 n3
Decimal: 27 105 88 121 50 nd1 nd2 nd3
Hexadecimal: 1B 69 58 79 32 nh1 nh2 nh3
Parameters
nh1: 01h (Fixed)
nh2: 00h (Fixed)
01h≤nh3≤63h
Description
 Specifies that the tape will be cut after the specified number of labels. (If the auto cut setting is ON, the
tape will be cut after the number of labels specified with this setting.)
nh3: Cuts after a specified number of labels (01h to 63h)
 This command is a static command.
 This command is applied to only a printer with auto cutter.
Example
 To cut after every five labels (However, the auto cut setting must be set to ON.):
ESC i X y 2 01h 00 05h
(1Bh 69h 58h 79h 32h 01h 00h 05h)