Brother MFC 8480DN - Manual (Page 27)

Configuring your machine for a network
16
2
c
Double-click the unconfigured device.
Note
• If the print server is set to its factory default settings (if you do not use a DHCP/BOOTP/RARP server), the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the node name and MAC Address (Ethernet Address) by printing the Network Configuration
List.
See Printing the Network Configuration List on page 123.
d
Choose STATIC from Boot Method (BOOT Method). Enter the IP Address, Subnet Mask and
Gateway (if needed) of your print server.
e
Click OK.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.
Windows ® Macintosh
Windows
® Macintosh