Brother MFC 8480DN - Manual (Page 83)

Wireless configuration for Macintosh using the Brother installer application (For MFC-8690DW and MFC-8890DW)
72
5
i
Choose the machine you wish to configure, and click Next. If the list is blank, check if the access point
and the printer are powered on, and then click Refresh.
Note
• The default Node name is “BRNxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is your machine’s MAC Address /
Ethernet Address.)
• You can find your machine’s MAC Address / Ethernet Address by printing out the Network Configuration
List. See Printing the Network Configuration List on page 123.
j The wizard will search for wireless networks available from your machine. Choose the access point you
wish to associate the machine with, and then click Next.