Brother HL-2460 - Manual (Page 141)

CHAPTER 4 OPTIONS
4–9
☛ ☛ ☛ ☛ 5.
Insert the network board connector firmly into the connector of the main
controller board, and then secure it with the two screws.
Fig. 4-7
☛ ☛ ☛ ☛ 6.
Secure the metal plate with the three screws in the order shown.
Fig. 4-8
☛ ☛ ☛ ☛ 7.
Close the side cover.
☛ ☛ ☛ ☛ 8.
Connect one end of the Ethernet Cable to the Network port of the printer.
☛ ☛ ☛ ☛ 9.
Plug the power cord into the AC outlet, and then turn on the power switch.
☛ ☛ ☛ ☛ 10.
For more details about how to optimize the Network board, please refer to
the Network User’s Guide on the CD-ROM supplied with this printer.
① ① ① ①
③ ③ ③ ③
② ② ② ②