Brother HL-2460 - Manual (Page 56)

1-36
✒ ✒ ✒ ✒
Note
Make sure that the neatly stacked paper is correctly seated on the multi-
purpose tray, otherwise paper may not be fed correctly, resulting in a skewed
printout or a paper jam
☛ ☛ ☛ ☛
5. While pressing the paper guide release lever, slide the adjuster to fit the
paper size.
Fig. 1-26
Warning
Do not touch transparencies that have just been printed because they are
very hot!
✒ ✒ ✒ ✒
Note
When you place paper in the multi-purpose tray, note the following:
•
When printing, the inside tray automatically rises to feed paper into the
printer.
•
The print surface must be face up.
•
The leading edge must be placed inside first so it rests lightly against
the printer.
•
The top of the paper stack must be under the guides that are on both
sides of the tray.