Brother MFC 9970CDW - Manual (Page 206)

199
12
12
Using the Scan key
12
Note
If you use the SCAN key when connected to a network, see Network Scanning on page 215.
You can use (SCAN) on the control panel to scan documents into your word processing, graphics or
E-mail applications or a folder on your computer.
Before you can use (SCAN) on the control panel, you have to install the Brother MFL-Pro Suite and
connect the machine to your computer. If you installed the MFL-Pro Suite from the included CD-ROM then
the correct drivers and ControlCenter4 or ControlCenter2 are installed. Scanning from the (SCAN)
button follows the configuration of the Device Scan Settings screen of ControlCenter4 or Device Button tab
of ControlCenter2. (For Windows
® , see Configuring Scan button settings on page 82 for Home Mode or
Configuring Scan button settings on page 93 for Advanced Mode. For Macintosh, see SCAN on page 176.)
For details about how to configure the scan settings of ControlCenter4 or ControlCenter2 buttons and to
launch the application of your choice using (SCAN), see ControlCenter4 on page 71 or ControlCenter2
on page 174.
Scanning (For USB cable users)
12