Brother MFC 9970CDW - Manual (Page 253)

Network Scanning
246
13
For Touchscreen models
13
a Load your document.
b Press (SCAN).
c Press Scan to Network.
d Press a or b to choose one of the profiles listed.
e If you check Use PIN for authentication in FTP/Network Scan Profile of Web Based Management, the
LCD will prompts you to enter a PIN number. Enter the 4-digit PIN number and then press OK.
 If the profile is complete, you will automatically go to step l.
 If the profile is not complete, for instance, the quality or file type are not chosen, you will be prompted
to enter any missing information in the following steps.
f
Choose one of the options below:
 Press d or c to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi
, Gray 200 dpi or Gray 300 dpi. Go to step g.
 Press d or c to choose B&W 200 dpi or B&W 200x100 dpi. Go to step h.
g
Press to choose PDF, PDF/A, Secure PDF, Signed PDF, JPEG or XPS.
Go to step i.
h
Press to choose PDF, PDF/A, Secure PDF, Signed PDF, or TIFF. Go to step i.
Note
• If you chose Secure PDF, the machine will ask you to enter a 4 digit password using numbers 0-9 before
it starts scanning.
• If you choose Signed PDF, you must install and then configure a certificate to your machine using Web
Based Management.