Brother MFC 9970CDW - Manual (Page 239)

Network Scanning
232
13
Scan to File
13
When you choose Scan to File, you can scan a black & white or color document and send it directly to a
computer you designate on your network. The file will be saved in the folder and file format that you have
configured in the Device Scan Settings screen of ControlCenter4 or Scan To File screen of ControlCenter2.
You can change the Scan configuration. (For Windows
®
, see Configuring Scan button settings on page 82
for Home Mode or Configuring Scan button settings on page 93 for Advanced Mode. For Macintosh, see
SCAN on page 176.)
a Load your document.
b Press (SCAN).
c Press a or b to choose Scan to PC.
Press OK.
d Press a or b to choose File.
Press OK.
If your machine does not support Duplex Scan, go to step f.
If your machine supports Duplex Scan, go to step e.
e Press a or b to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
f Press a or b to choose the destination computer you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer
on the control panel.
Press OK.
g Press Black Start or Color Start.
The machine starts the scanning process.
For Touchscreen models
13
a
Load your document.
b Press (SCAN).
c Press Scan to PC.
d Press File.
e Press a or b to choose the destination computer you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer
on the control panel.
Press OK.