Brother PT-7500 - Manual (Page 20)

5
G
e
tti
n
g
Starte
d
Back light
Press
g and f to turn on or turn off the back light. The back light can be used
when you wish to see the display more clearly. The default setting is ON.
Power Supply
The P-touch labeler can be supplied with power in two or three ways.
* The rechargeable battery pack is a consumable product. Therefore, there is no guarantee
available for the deterioration of the products.
Use the power supply best suited to your needs. For details on each power supply, refer
to the following.
AC Adapter
Connecting the AC adapter
When printing a large number of labels or labels that contain a large amount of text, it
may be useful to connect the P-touch labeler to a standard electrical outlet using the AC
adapter.
☞ Power can be saved when the back light is turned off.
☞ When the back light is turned off, the back light will flash on for about a second when
first powering on the machine as a reminder you can use this feature if the display is
too hard to see.
AC adapter (page 5) Batteries (page 6) Rechargeable battery pack (page 7)
PT-7500 ● ● -
PT-7600 ● ● ●
1
2