Brother PT-7500 - Manual (Page 43)

28
Formatting the Label
Specifying a label length
The length of the label can be specified as follows.
1 Press
g, then A.
2 Press
l or r until LENGTH is displayed.
3 Press
u or d until the desired label length is
displayed (or use the number keys to type in the
desired setting).
4 Press
n.
Specifying a margin size
The size of the margins for the left and right sides of the text can be specified.
1 Press
g, then A.
2 Press
l or r until MARGIN is displayed.
3 Press
u or d until the desired margin
setting is displayed (or use the number keys to
type in the desired margin setting).
4 Press
n.
☞ Once the PERSONAL symbol category becomes full , newly selected symbols will
overwrite older ones unless the Symbol Save function is set to OFF . (Refer to
Specifying if the PERSONAL symbol category is continually updated on page 44 . )
00 01 02 03
Category Symbols
OTHERS
O
Z
PERSONAL
CATEGORY
*A maximum of 16 most recently selected symbols are
automatically saved in the PERSONAL symbol category for
quick and easy symbol use.
0.30" to 39.00"
(6.0 to 999.9 mm)
0.10" to 4.00" (2.0 to 99.9 mm)