Brother PT-7500 - Manual (Page 95)

80
NO FILES!
• This message appears if no
files are stored in the
memory when you try to
recall or delete one.
• Store a text file before trying
to recall or delete one.
OK TO REDUCE
THE BLOCK NO.?
• The message appears if you
select the PANEL2 Label
Type mode, and when the
number of the desired blocks
is less than that of the text
mode, the number is reduced.
• Press
n to reduce.
Press
b to set the same
or the more numbers of the
blocks.
RECORD NOT
FOUND!
• This message appears when
the specified text or record
number cannot be found in
the database.
• Try searching for different
text or a different record
number.
TAPE CASSETTE
CHANGED!
• This message appears if the
tape cassette was changed
while the P-touch labeler
paused for the tape to be cut.
• Change the tape cassette
back again.
TEXT TOO HIGH!
XX BLOCK
• This message appears if the
size of the text is larger than
the width of the installed
tape.
• Reduce the size of the
characters, install a tape
with a greater width, or
select the AUTO text size
setting.
TEXT TOO LONG!
• This message appears if the
length of the text is longer
than the label length that has
been set with the Length
function.
• Press
A
, and then select a
longer label length.
TEXT TOO LONG!
XX BLOCK
• This message appears if you
try to print a label that is
longer than the specified
block length.
• Select a longer block length.
VALUE OUT OF
RANGE!
• This message appears if the
value entered while setting
the Margin, Length, and
Block Length function is not
within the allowable range.
• This message appears if the
specified characters cannot
be found in the database.
• This message appears if the
values for the blocks,
records or fields to be
printed is not within the
allowable range.
• Type in a value that is within
the allowable range.
Error Message Cause Solution