Brother PT-7500 - Manual (Page 26)

11
G
e
tti
n
g
Starte
d
Flexible ID Tape
☞ For applications that require more flexible labels, such as around sharp bends and
cylindrical objects, we recommend using Flexible ID Tape.
☞ Labels made with Flexible ID Tape are not designed for use as electrical insulation.
☞ When wrapping labels around cylindrical objects, the diameter of the object should be at
least 1/8" (3 mm), otherwise the label should be wrapped as a flag and the FLAG Label
Type mode should be used. In addition, the overlapping ends of the label or the label flag
should be at least 3/16" (5 mm).
☞ The label may peel off cylindrical objects if the object is bent after the label is affixed.
Diameter > 1/8"
(3 mm)
Diameter > 1/8"
(3 mm)
Overlap > 3/16"
(5 mm)
Overlap > 3/16"
(5 mm)
Flag > 3/16"
(5 mm)